หน้าแรก
» วิธีการ
»
How to Clean a Hydro Flask Straw Lid Without Missing the Hidden Parts
How to Clean a Hydro Flask Straw Lid Without Missing the Hidden Parts
To clean a Hydro Flask Flex Straw Cap thoroughly, take it apart first: open the straw nozzle, pull the straw out of the red seal, remove the red seal by its tab, then wash every piece with hot, soapy water or place the pieces on the dishwasher’s top rack. Let everything dry completely before pressing the seal back into the cap and reinstalling the straw. That sequence comes directly from Hydro Flask’s current cleaning guidance for the Flex Straw Cap.
The most important question is whether you actually have a Flex Straw Cap. Hydro Flask sells several cap and lid designs, and they do not all disassemble the same way. The steps below are based on the manufacturer’s official Flex Straw Cap cleaning instructions, published August 28, 2024 and still available on Hydro Flask’s U.S. site in 2026.
Which Hydro Flask straw lid are you cleaning?
If your cap has a flip-up straw nozzle, a removable internal straw, and the removable red seal shown in Hydro Flask’s Flex Straw Cap instructions, this guide applies directly. If you have a Press-In Straw Lid from a tumbler or another cap style, use the care instructions for that specific product instead of forcing parts apart.
Question
Short answer
Can the Flex Straw Cap go in the dishwasher?
Yes. Hydro Flask says the pieces are top-rack dishwasher safe.
Should the straw be removed?
Yes. Remove it from the red seal for thorough cleaning.
Should the red seal come out?
Yes. Pull it out using its tab.
Can I use bleach or chlorine cleaner?
Avoid it. Hydro Flask’s general care guidance says to avoid dishwasher cleansers with bleach or chlorine.
Do I need a special brush?
No special branded tool is mandatory, but a straw brush and small detail brush make the narrow passages much easier to clean.
Start by identifying the removable pieces before washing. On Hydro Flask’s current Flex Straw Cap, the straw and the red seal are designed to come out for cleaning.
What should you gather before starting?
You only need a few things: mild dish soap, hot or comfortably hot washing water, a clean towel or drying rack, and ideally a narrow straw brush plus a small soft detail brush. Hydro Flask sells a Straw Cleaning Set with nylon bristles; the company says its straw brush is intended for the inside of Hydro Flask straws and its detail cleaner fits cap and lid crevices. A similar clean, soft brush that fits the parts can serve the same practical purpose.
Avoid knives, pins, metal picks, or other sharp tools around the seal. They can scratch plastic or damage the sealing surface. Also keep the Flex Straw Cap away from hot beverages; Hydro Flask states that this cap is not designed for hot liquids.